Sportplus SP-WR-1500-B-iE Manual De Instrucciones página 37

Idiomas disponibles

3. Preparing / Placing / Moving

Filling and emptying the tank

6. Remove the tank lid (33) from the upper tank cover.

7. To fill the tank with water, insert the funnel (77) into the tank and then use a cup or

the pump siphon (76) and the bucket to fill the tank (see Fig. A). Use the water level

indicator on the side of the tank to measure the desired water level.

8. To empty the tank, see Fig. B. Place the bucket next to the rower and use the pump

siphon (76) to pump the water from the tank into the bucket.

9. Insert the tank lid (33) into the upper tank cover. Wipe any excess water from the

frame.

Note:

•

Fill the tank with tap water only. Add 1 water cleaning tablet (1 package is

included*). Never use pool chlorine or chlorine bleach. This will damage the tank

and void the warranty.

•

Add a water cleaning tablet once every 6 months or as needed. If the water remains

cloudy, replace the water in the tank.

•

Water from the tank is not suitable for drinking. Dispose of the water after pumping

it from the tank.

*Warning!

Hazardous to health if swallowed. In case of contact with eyes, immediately rinse

thoroughly with water and seek medical attention. After use, thoroughly wash hands with

water and soap. Store out of the reach of children. Store at a cool, dry location.

SP-WR-1500-B-iE-IM-INT-V01.indb 37

20 Aug 2021 9:04:13 am