The Handle Installing; Shelves; To Remove A Shelf; Electrical Connection - Caso WineDuett Touch 21 Manual De Instrucciones

 For energy saving reasons please ensure that the door is closed when the appliance is
turned on.
13.5.2

The handle installing

The device comes with 1 metal stainless steel handle. To install simply screw them to the
door with the supplied screws.
13.5.3

Shelves

Remove all bottles from the shelves. Lift the shelf upwards and the gently pull it out. Any of
the shelves can be removed to accommodate larger bottles.
13.5.4

To remove a shelf

Remove all bottles from the shelves. Lift the shelf upwards and the gently pull it out.
► Ensure that the tabs are firmly engaged in place before storing any bottles.

13.6 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the following instructions
must be observed for the electrical connection:
 Before connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network. This data must agree in order that no
damages occur in the device. If in doubt, ask your qualified electrician.
 The electrical outlet must be protected by a 16A safety cut-out switch.
Please note
screw
handle
30