Idiomas disponibles
Idiomas disponibles
Pump filter
You should clean the pump filter 5 or 6 times a year to prevent it from clogging.
Untitled-13 47
1. Turn off the washer, and then unplug the power cord.
2. Gently press the top area of the filter cover to open.
3. Drain the remaining water inside the drum. See the
Emergency drain section on page 45.
4. Turn the pump filter knob (A) counterclockwise, and
then drain the remaining water.
5. Clean the pump filter using a soft brush. While the
pump filter is removed, make sure the impeller inside
the drain pump is free of debris.
6. Reinsert the pump filter, and then turn the filter
knob clockwise.
7. Close the filter cover.
NOTE
• Some pump filters feature a safety knob that is
designed to prevent children from accidentally
opening the filter compartment. To open the
safety knob of the pump filter, push in and turn it
counterclockwise. The spring mechanism of the
safety knob helps open the filter.
• To close the safety knob of the pump filter, turn it
clockwise. The spring makes a rattling sound, which
is normal.
• Before closing the filter cover, make sure the pump
filter is properly inserted.
English 47
2022-03-30
3:32:40
