Idiomas disponibles
Idiomas disponibles
To remove the dust cover, press one side of the cover,
and then remove it as shown in the figure.
1
Fig.20
► 1. Dust cover
Installing or removing the dust
nozzle
Country specific
You can connect this tool to a Makita vacuum cleaner
by attaching the dust nozzle.
Insert the dust nozzle all the way into the tool.
Fig.21
► 1. Dust nozzle
To remove the dust nozzle, pull out the dust nozzle
while pressing the button on the dust nozzle.
1
Fig.22
► 1. Button 2. Dust nozzle
Connecting the tool to the vacuum
cleaner
Connect the hose of the vacuum cleaner to the dust nozzle.
Fig.23
Rip fence
Optional accessory
CAUTION:
switched off and the battery cartridge is removed
before installing or removing accessories.
1
Straight cuts
When repeatedly cutting widths of 160 mm (6-5/16") or less,
use of the rip fence will assure fast, clean, straight cuts.
Fig.24
► 1. Rip fence (Guide rule)
12 ENGLISH
Always be sure that the tool is
1
2
