M e s s a g e s
Reply to multimedia message
Select
Reply
or
Reply to all
any other message recipients.
■ Voice messages
If you subscribe to voice mail, your network operator will furnish you with a voice
mailbox number. You need to save this number to your device to use voice mail.
When you receive a voice message, your device beeps, displays a message, or both.
If you receive more than one voice message, your device shows the number of
voice messages received.
Save voice mailbox number
Your network operator may have already saved your voice mailbox number to
your device. Select
OK
1. In the standby mode, select
mailbox
number. The voice mailbox number is displayed.
2. If the box is empty, enter the voice mailbox area code and number, and
select OK.
Call and setup voice mail
1. After you save the voice mailbox number, in the standby mode, press and hold 1.
2. When you connect to voice mail and the prerecorded greeting begins, follow
the automated instructions to setup voice mail.
Listen to voice messages
After you set up voice mail, in the standby mode, press and hold 1; or select
Menu
>
Messages
>
mailbox number. When you connect and the prerecorded greeting begins, follow
the automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers such
as voice mail, and save the number to a 1-touch dialing location. Dialing codes
instruct the receiving system to pause, wait, bypass, or accept the numbers that
follow them in the dialing string. See "Phone numbers with dialing codes," p. 35.
Voice mail services vary by network operator. The following instructions are
examples of common operations. Please check with your network operator for
specific instructions on using your voice mail service.
34
to enter a reply and send it to the original sender and
to leave the number unchanged.
Menu
>
Messages
Voice messages
>
Listen to voice messages
>
Voice messages
>
to dial the voice
Voice