Idiomas disponibles
Idiomas disponibles
Operation
(Continued)
• Save all instructions
C
Stop the Engine
1. Press ON/OFF switch to OFF position.
D
Operating Speed
This tiller is equipped with a fixed throttle that is set for
optimum tilling performance.
E
Shutting Down
To stop the engine at any time, release the clutch lever and
press ON/OFF switch to OFF position. To stop tines at any time,
release clutch lever.
F
Transport Mode and Tilling Mode (See Figure 11 and 12)
Transport Mode
Fold the wheel under the engine for convenient transport.
Tilling Mode
Unfold the wheel back for tilling operation.
G
Tilling
1. Adjust the drag bar to desired tilling depth.
WARNING
NOTE: Lower the drag bar one hole at a time testing tiller
operation after each adjustment. Lowering drag bar down too
low can result in loss of control of tiller!
2. Pushing down on the clutch lever will engage the tines to
move tiller forward.
CAUTION
ALWAYS PRESS CLUTCH LEVER DOWN COMPLETELY
ONTO THE HANDLE bAR GRIP. FAILURE TO DO SO MAY
RESULT IN EXCESSIVE DRIVE BELT WEAR AND PRE-
MATURE DRIVE BELT FAILURE.
Questions? Call Toll Free at 1-800-737-2112
WARNING
TEMPERATURE OF MUFFLER AND NEAR BY AREAS MAY EX-
CEED 150˚F. AVOID THESE AREAS.
TO STOP TINES AT ANY TIME, RELEASE CLUTCH LEVER TO
NEUTRAL POSITION.
ALWAYS RELEASE CLUTCH LEVER TO NEUTRAL POSITION
AND STOP THE ENGINE bEFORE ADJUSTING THE DEPTH OF
THE DRAG bAR.
DANGER
ENGINE, TRANSMISSION AND SURROUNDING PARTS BECOME
ExTREMELY HOT DURING NORMAL USE AND CAN CAUSE
SERIOUS bURN INJURIES IF TOUCHED bEFORE THE ENGINE
HAS COOLED.
Figure 10
ALLOW ENGINE TO COOL COMPLETELY bEFORE TOUCHING
THESE HOT SURFACES.
IMPORTANT:
LER WITH TINES OUT OF GROUND bEFORE bEGINNING TO
TILL. IT IS IMPORTANT THAT YOU kNOW HOW TO USE THE
TILLER PROPERLY, kEEP CONTROL AT ALL TIMES, STOP THE
TINES, AND STOP THE ENGINE IF NECESSARY. IF YOU DO
NOT kNOW HOW TO DO THESE THINGS, READ THE CON-
TROLS, ADJUSTMENTS AND SAFETY SECTIONS BEFORE
PROCEEDING.
12
PRACTICE OPERATING THE CONTROLS AND TIL-
Copyright © 2011 MAT Engine Technologies, LLC
Figure 11
Figure 12
