Idiomas disponibles
Idiomas disponibles
Model Number
Voltage
Anvil
Max. Tightening Torque
No Load Speed
Tool Weight (with battery 2.0Ah)
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery release button (see Fig. 2A), and
pull battery pack out of tool.
TO INSTALL BATTERY PACK: Align rails (see Fig. 2B), on the tool with the four
tabs on the battery pack, and push battery pack onto tool until it locks in place.
B
A
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil (see Fig.3).
2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
1English1
SPECIFICATIONS
Unit
V d.c.
in.
ft-lbs/Nm
rpm
lbs/kg
ASSEMBLY
Fig. 2
English
-7
RW1216-3
12
3/8"sq.
65 / 88
0-260
3.00 / 1.36
