Daikin SPLIT FTXN25NV1B Manual De Instalación página 18

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
1.
Open the front panel.
Hold the panel at the recesses on the main unit
(2 recesses on right and left sides) and lift it until it
stops.
2.
Pull out the air filters.
Push a little upwards the tab at the center of each air
filter, then pull it down.
Hold the recessed parts of the frame and unhook the
four claws.
3.
Clean or replace each filter.
When shaking off remaining water, do not wring the
filter.
Filter frame
Tab
AIR FILTER
Recess on
main unit
Air filter
Titanium apatite
deodorizing filter
1-16
4.
Set the air filter as they were and close the front
panel.
Insert claws of the filters into slots of the front panel.
Close the front panel slowly and push the panel at the
3 points. (1 on each side and 1 in the middle.)
The air filter have a symmetrical form in the horizontal
direction.
FRONT
loading