Cuda surgical LLS-1000 Manual Del Operador página 12

11. TROUBLESHOOTING
Problem
The power indicator (refer
to 4.1) is not lit.
The power indicator is lit,
but lamp will not ignite.
12. CHART OF MEDICAL DEVICE SYMBOLS USED
13. CHART OF ELECTRICAL SYMBOLS USED
Product labeling
ratings, manufacturer name, Regulatory marks, and FDA "Rx Only" symbol.
®
LIT169 CUDA SURGICAL
(English)
Solution
A. Check that the AC power cord is properly
connected.
B. Check the unit fuses. If necessary, replace.
Turn intensity control knob clockwise to increase light output
intensity
Manufacturer
Date of manufacture (YYYYMM or
YYYY)
"Authorized Representative" in the
European Community
Caution, consult
documents
Caution: Federal law restricts this device
to sale by or on the order of a licensed
healthcare practitioner
Consult Instructions for Use
CE mark
AC Current
Equipotentiality
Power on
Power off
Type BF
Protective Earth (Ground)
Product label containing model number, serial number, electrical
accompanying
Date of Revision:06/11/14
Rev. B
Page 12 of 64