Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3.6. Measurement
Before to use this instrument the User guide and Safety warnings must be read
and understood.
Safety procedures and rules for working near high voltage energized systems
must be observed during the use of this equipment. The generated voltages
and currents may be dangerous.
1.
Before power-on the equipment, connect the test probes to the
item to be measured and to the front panel terminals, as shown
in figure 2 for current up to 10 A or in figure 3, for the 200 A
range.
R
R
The clamps in the drawings are only for illustration.
Warning
11
fig. 2
fig. 3
Capítulos
Tabla de contenido
