Idiomas disponibles
Idiomas disponibles
EN
ACCESSORIES
PT-78-K10 & PT-78-K60 Liner.
A moulded polyethylene tank liner
to reduce tank clean up time. The
liner is made of tough, durable,
leak proof polyethylene and can
be re-used. May be used with all
materials that are compatible with
polyethylene.
(Available
packages of 10 and 60 only.)
ITW Finishing Systems and Products
Ringwood Road,
Bournemouth,
BH11 9LH,
England.
Tel. No. (01202) 571111
Telefax No. (01202) 581940,
Website address http:\\www.itweuropeanfinishing.com
Carlisle Fluid Technology confirms that the products listed below, defined under the Pressure Equipment Directive (PED)
2014/68/EC as 'Pressure Accessories' , are below or equal to the limits set out in points (a), (b) and (c) of paragraph 1
ITW Oberflächentechnik GmbH & Co. KG
and in paragraph 2 respectively and have been designed and manufactured in accordance with Sound Engineering
Justus-von-Liebig-Straße 31
Practice (SEP) Article 4, Paragraph 3. As such, CE marking must not be applied. The equipment is marked under section
63128 Dietzenbach
3.3 of Essential Safety Requirements of the directive.
Tel (060 74) 403-1
Telefax: (060 74) 403300
Website address http:\\www.itw-finishing.de
ITW Surfaces Et Finitions
163-171 avenue des Auréats B.P. 1453
26014 VALENCE CEDEX FRANCE
Tél. (33) 475-75-27-00
Télex 345 719F DVILBIS
Téléfax: (33) 475-75-27-99
© ITW Ltd 2007
www.carlisleft.com
PT-413 Air Regulator Kit.
Used to convert single regulated
tanks
(fluid
regulation (fluid and air). Used
with portable air compressors or
with air lines when no other
means
(air
in
regulators)
of
regulation is available.
STATEMENT OF COMPLIANCE
SOUND ENGINEERING PRACTICE
IN ACCORDANCE WITH PED 2014/68/EC
PART NO.
DESCRIPTION
VA-527
BALL VALVE, 3/8 NPS OUTLET, S.S.
VA-540
BALL VALVE, 3/8 NPS OUTLET
VA-542
BALL VALVE
HAR-507
AIR REGULATOR
HAR-511
AIR REGULATOR
HAV-500
AIR ADJUSTING VALVE
8 / 8
Ball Valves.
To add a Ball valve to the Air
only),
to
dual
Inlet, remove Nipple (ref. No. 29).
Replace with Ball Valve VA-5432-
K (NPS) or VA-5427-K (BSP).
transformers
or
VA-527 S.S. fluid outlet shut-off
air
pressure
valve. To install, remove the
adapter (Ref. No. 16), replace
with Ball valve (taper thread to
regulator).
Using these valves will simplify
attachment of air and fluid hoses.
QMS-79
Used
waterborne materials where over-
agitation may be a problem.
Page 8
Optional
Propeller.
with
light
viscosity
or
SB-E-21-042-R10 (9/2021)
