Idiomas disponibles
Idiomas disponibles
Installation
1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old faucet.
□
Clean off the mounting surface.
□
WITHOUT DECK PLATE: Remove the lock nut
(I). Insert the faucet body (A) through the sink
mounting hole.
1 1/4"~1 1/2"
(32mm~38mm)
A
I
J
M
4
□
WITH DECK PLATE: Install the faucet body through
the top of the sink (not included). Place a bead of
clear silicone sealant (not included) around the
base of the putty plate (D). Align the hole in the
gasket (D) and deck plate (C) with the mounting
hole in the sink (not included). Insert the outlet
hose, water supply lines (L) and pull-down spray
hose (M) through the deck plate (C) and mounting
hole in the sink until the faucet (A) sets on top of
the deck plate (C).
1
1 1/4"~1 1/2"
(32mm~38mm)
A
C
J
D
L
M
2
