How To Use Your Steam Cleaner - Home DUPRAY Manual De Instrucciones

HOW TO USE YOUR STEAM CLEANER

FILLING WITH WATER
Remove the boiler cap ( 1 ) and pour 700ml ( 23 oz ) of water in the boiler. Use the provided
funnel if needed. The more water you put in, the more humidity will be contained in
the steam. The more space you leave for steam, the drier it will be. Always respect the
recommended quantity of water. Securely replace the boiler cap.
IMPORTANT:
PLUGGING IN THE MACHINE
Unravel completely the electrical cord. Connect the electrical cord
to a 15 or 20 amp 110V / 120V power outlet ( make sure the circuit
is not already used by another high wattage appliance ).
TURNING THE MACHINE ON
Press the power button ON. The orange SteamReady™ indicator will come on
when the unit reaches operating pressure, after approximately 8 minutes of heating time.
During use, the orange SteamReady™ indicator will turn on and off.
This is normal, and indicates that steam is being generated in the boiler.
Do not overfill with water. Leave space for steam!
ADJUSTING THE STEAM PRESSURE
Adjust the desired steam pressure using the steam pressure dial on the steam cleaner,
from minimum ( left ) to maximum ( right ). Connect the accessory that you want
to use to the steam hose.
To release steam, simply press the steam release trigger on the hose handle.
REFILLING WITH WATER
When steam runs out or if the low water indicator comes on during usage and you would like to continue using
the steam cleaner, you will need to follow theses steps:
TURN THE UNIT OFF RELEASE ALL STEAM PRESSURE
by pressing the OFF button. by pressing on the steam release trigger on
the hose and let the steam cleaner
cool down for 10 minutes.
IMPORTANT:
Do not overfill. Leave space for steam!
WARNING:
If all steam pressure has not been released,
steam may escape from the boiler cap when opening,
use caution.
en
MINIMUM MAXIMUM
REFILL WITH 700 ML ( 23 OZ. ) OF WATER.
Refasten the boiler cap ( 1 ) and press the
power button ( 2 ) ON. Wait about 8 minutes for
the SteamReady™ indicator ( 6 ) to turn on and
continue steam cleaning.
8