memorex MT2252S Manual De Instrucciones página 11

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING GUIDE
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS
POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
TV does not
• Try another AC outlet.
operate
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems,
tune to another station.
Poor sound
• Check sound adjustments (Volume and Muting).
or No sound
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
Poor picture
• Check antenna or CATV connections, adjust
or No picture
antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems,
Poor
tune to another station.
reception on
• Make sure channels are set into memory.
some
• Station is weak, adjust antenna to receive
channels
desired station.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
Poor color or
• Check picture control adjustments.
no color
• Check antenna or CATV connections, adjust
antenna.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
Picture
• Make sure channels are set into memory.
wobbles or
• CATV company is scrambling signal.
drifts
• Adjust antenna.
SPECIFICATIONS
Model
AC Power Input:
AC Power Consumption:
Chassis Construction:
Picture Tube:
Horizontal resolution:
Audio Power Output Rating:
Speaker:
Tuner Type:
Remote Control:
Receiving Channels:
Antenna Input Impedance:
Input/Output:
Dimensions:
Weight:
ACCESSORIES
Remote Control
3L40901A-E
MT2252S
120V, 60Hz
110 Watts
IC Solid state
25" (measured diagonally)
260 lines
2.5 + 2.5 Watts
1-1/2" x 2-11/16" Full Range, 8 ohm x 2
181 Channel, Quartz PLL Frequency Synthesized
Infrared, Direct Access, 2 x AAA batteries (not supplied)
VHF
2-13
UHF
14-69
CATV 01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
75 Ohm (VHF/UHF/CATV) Coaxial Input
S-Video
Y-Input : 1.0Vp-p/75 ohm
C-Input : 0.3Vp-p/75 ohm
Video:
In (RCA) 1.0Vp-p/75 ohm
Out (RCA) 1.0Vp-p/75 ohm
Audio:
In (RCA) –8dB/50K ohm
Out (RCA) –8dB/1K ohm
24-5/16" (W) x 19-13/16" (D) x 20-11/16" (H)
59.9 Ibs
11
SYMPTOMS
POSSIBLE SOLUTIONS
• Check all CATV connections.
No CATV
• Set TV/CATV menu option to the CATV mode.
reception
• Station or CATV system problems, try
another station.
Horizontal or
• Check antenna connections, adjust or
diagonal bars
re-direct antenna.
on screen
• Check for sources of possible interference.
• Make sure TV/CATV menu option is in the
No reception
above
appropriate mode.
• If using antenna, check UHF antenna connections.
channel 13
• Batteries are weak, dead or inserted incorrectly.
• Remote is out of range, move closer to TV
(within 15 feet).
No Remote
• Make sure Remote is aimed at sensor.
operation
• Confirm there are no obstructions between
the Remote and the TV.
• Make sure the power cord is plugged in.
No reception
• Reset your password.
• No broadcast on station tuned.
TV shuts off
• Sleep Timer is set.
• Power interrupted.
• TV station experiencing problems or program
tuned is not closed captioned. Try another channel.
Closed -
• Check CATV connection or VHF/UHF
Caption is
antenna, reposition or rotate antenna.
not activated.
• Press TV/CAP/TEXT button to turn on the
closed caption decoder.
Display is not
shown in your
• Select proper language in the menu options.
language.
115 Watts
27" (measured diagonally)
25-9/16" (W) x 18-13/16" (D) x 22-1/16" (H)
77.6 Ibs
11/3/2002, 12:05
MT2271S
11
loading

Este manual también es adecuado para:

Mt2271s