Idiomas disponibles
Idiomas disponibles
4 GETTING STARTED (continued)
4.3 SELECTING YOUR LANGUAGE
1
Press and hold the ON/OFF button until the Elcometer logo is
displayed.
2
Press Menu/Setup/Language and select your language using the
softkeys.
3
Follow the on screen menus.
To access the language menu when in a foreign language:
1
Switch the gauge OFF.
2
Press and hold the left softkey and switch the gauge ON.
3
Select your language using the
4.4 SCREEN SETTINGS
A number of screen settings can be defined by the user via
Menu/Setup/Screen Settings including:
Screen Brightness; This can be set to 'Manual' or 'Auto' - the
brightness is adjusted automatically using the gauge's ambient
light sensor.
Screen Timeout; The display will dim if inactive for more than
15 seconds and will go 'black' if inactive for the period defined.
Press any key or tap the gauge to awaken it. The gauge can
also be set to switch off automatically after a user defined
period of inactivity via Menu/Setup/Gauge Auto Off. The
default setting is 5 minutes.
4.5 SETTING UP THE READING DISPLAY
The colour LCD display is split into two halves; Top Display and
Bottom Display. The user can define what information is displayed in
each half including: Readings, Selected Statistics, Run Chart,
Bar Graph, Readings & Differential (MTG8 only) and B-Scan
(MTG8 only).
To setup the display:
1
Press Display/Setup Display/Top Display (or Bottom Display as
required).
2
Use the
'Select'.
a
Not available in 'Scan Mode' - see Section 10.3 'Taking a Reading in Scan Mode' on page en-22.
en-5
R
softkeys to highlight the required option and press
softkeys.
a
www.elcometer.com
