Idiomas disponibles
Idiomas disponibles
11 BATCHING
The MTG6 has a single batch memory which can store up to 1,500
readings whilst the MTG8 can store 100,000 readings in up to 1,000
batches. The following batch functions are available:
Batch/New Batch; Creates a new sequential or grid batch
(MTG8 only) - see Section 11.1 'Creating a New Batch' on
page en-24.
Batch/New Batch/Fixed Batch Size (MTG8 only); Pre-define
the number of readings which are stored in a batch. The gauge
will notify the user when a batch is complete and ask if another
batch is to be opened. These batches are then linked when
transferred to ElcoMaster . This feature is only available in
sequential batching - see Section 11.1 'Creating a New Batch' on
page en-24.
Batch/Open Existing Batch; Open an existing batch.
Batch/Review Batch; Review the readings, statistics, batch
information, calibration and limit information and a graph of all
readings (MTG8 only) - see Section 12 'Reviewing Batch Data'
on page en-25.
Batch/Copy Batch (MTG8 only); Copy a batch including the
batch header information, calibration and limit information.
Batch/Edit Batch/Rename Batch; Rename an existing batch.
Batch/Edit Batch/Clear Batch; Clear all readings within a
batch - but leaving all batch header information.
Batch/Edit Batch/Delete Batch; Delete a single batch or all
batches entirely from the gauge.
Batch/Deleted Reading/Delete Without Tag; Delete the last
reading entirely.
Batch/Deleted Reading/Delete With Tag; Delete the last
reading but mark it as deleted in the batch memory.
en-23
R
®
www.elcometer.com
