3.7 Inserting the collection bag
A dust collection bag made of filtering material
(paper or microfibre) can be inserted in the drum.
The bag can be inserted easily, feeding the piece
of cardboard with the rubber membrane through
the internal sleeve of the vacuum nozzle shaft.
Make sure that the membrane goes past the raised
part on the sleeve.
The bag is disposable, once it is full it must be
replaced.
*Optional feature depending on the model.
3.8 Tilting trolley*
The machine is equipped with a tilting trolley for
discharging the collected material into the drum.
Release the clips on the vacuum cleaner head and
separate it from the drum.
Release the drum clips from the trolley and lift the
drum from the handle at the front.
4 Use
CAUTION
Certain accessories are put in the vacuum
cleaner tank to prevent them from being
damaged during transport. These must be
removed from the tank before switching
the vacuum cleaner on.
4.1 Vacuuming liquids
Before vacuuming liquids.
CAUTION
The appliance is equipped with a float
system which closes the air flow when the
maximum liquid level is reached. You will
hear a significant change in the sound
emitted by the motor and you will notice a
reduction of vacuum power. When this
occurs, switch the appliance off.
Disconnect the appliance from the power
socket. Never vacuum liquids without the
float in place.
Switch the appliance off and disconnect it from the
power socket.
To vacuum liquids, remove the collection bag, the
bag filter or the cartridge filter. The latter can also
be left in place.
EN
7