Idiomas disponibles
Idiomas disponibles
CARE AND CLEANING
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read and follow this entire Owner's
Manual, including the Important Safety Instructions, before operating this washer.
y Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning
can cause serious injury, fire, electric shock, or death.
y Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage
the finish.
REGULAR CLEANING
CLEANING THE EXTERIOR
Proper care of your washer can extend its life. The
outside of the machine can be cleaned with warm
water and a mild, nonabrasive household detergent.
Immediately wipe off any spills with a soft, damp
cloth.
IMPORTANT: Do not use solvents, cleaning alco-
hols, or similar products. Never use steel wool or
abrasive cleaners because they can damage the
surface.
CARE AND CLEANING OF THE INTERIOR
Use a towel or soft cloth to wipe around the washer
lid opening and lid glass.
Always remove items from the washer as soon as
the cycle is complete. Leaving damp items in the
washer can cause wrinkling, color transfer, and odor.
Run the Tub Clean cycle once a month, or more of-
ten if needed, to remove detergent buildup and
other residue.
TUB CLEAN CYCLE
Some environmental and usage conditions can
cause a residue to build up in the tub over time and
can lead to a mildewy or musty smell. The Tub Clean
cycle is specially designed to remove this buildup
using bleach or other cleaners designed specifically
for cleaning washing machines. Run the Tub Clean
cycle once a month, or more often under heavy use
conditions or if odor is present
1. Remove any clothing from the tub.
2. Fill the bleach dispenser to the MAX line with
liquid chlorine bleach. Do not overfill the bleach
dispenser. Overfilling will cause the bleach to dis-
pense immediately.
NOTE: For other tub cleaning products, follow the
cleaner manufacturer's instructions and recommen-
dations. For powdered cleaning products, add the
cleaner to the main wash compartment of the dis-
penser drawer after removing the liquid detergent
dispenser insert.
3. Close the lid and press the POWER button to turn
the washer ON. Turn the knob to select the Tub
Clean cycle then press the START/PAUSE button
to begin the cycle. Selecting any other cycle after
Tub Clean has been selected will cause the Tub
Clean cycle to be cancelled.
4. After the cycle ends, open the lid and allow the
tub interior to dry completely.
NOTE:
y Never load laundry while using TUB CLEAN. The
laundry may be damaged or contaminated with
cleaning products. Make sure to run the Tub
Clean cycle ONLY when the tub is empty.
y It is recommended to leave the lid open after fin-
ishing the laundry to keep the tub clean.
y It is recommended that Tub Clean should be re-
peated monthly.
REMOVING MINERAL BUILDUP
If you live in an area with hard water, mineral scale
can form on internal components of the washer.
Use of a water softener is recommended in areas
with hard water.
Use a descaler to remove visible mineral buildup on
the washer tub. After descaling, always run the Tub
Clean cycle before washing clothing.
Mineral scale and other spots may be removed
from the stainless steel tub using a stainless steel
cleaner. Do NOT use steel wool or abrasive clean-
ers.
LEAVE THE LID OPEN
If the washer will not be used for several days, leave
the lid open overnight to allow the tub to dry.
CARE ANd CLEANING
27
