T2788
1
1
T4788
NOTE: The deck and valve rough-in must be finished before
installing the trim kit.
Model T2788
Unscrew the test cap (1) and discard.
Model T4788
Remove set screw (1). Remove and discard test cap (2).
1
2
Screw bases (1) with gaskets (2) over end valves (3). OPTION: Use
silicone under the gasket if deck is uneven. Install spout (4) on
adapter (5). Be sure spout is resting firmly on deck. Install set
screw (6) and tighten to secure spout (4). Install plug button (7).
Model T2788 proceed to step 4. Model T4788 proceed to step 3.
5
47801 Rev. A
