Idiomas disponibles
Idiomas disponibles
USE
This steam generator offers 2 options: dry ironing or steam ironing. Follow the instructions below. Also
carefully read the ironing tips at the end of this section before using the appliance.
DRY IRONING
1.
Place the iron on the thermal insulation pads of the steam generator.
2.
Put the plug into the outlet and press the on/off button. The temperature
indicator light will start flashing.
3.
Select the desired temperature with the temperature dial, according to the
kind of fabric that needs to be ironed. The temperature indication light will
start flashing and the iron will start warming up.
4.
When the temperature indication light stays on, the selected temperature
has been reached. You can now start ironing.
Caution: Never touch the hot soleplate!
STEAM IRONING
Caution: do not plug in the appliance yet at this point.
1.
Fill the water tank with water. Make sure that you do not exceed the maximum level (1,5 L). Use only
mains water or 50 % mains water and 50 % de-mineralised water if you have hard water.
2.
Replace the water reservoir in the appliance. You will hear a click when the reservoir is correctly
positioned in the appliance. If the reservoir is not correctly positioned in the appliance, it will not
work.
3.
Place the iron on the thermal insulation cushions. Put the plug into the
outlet and press the on/off button. Set the temperature dial to the desired
temperature, according to the kind of fabric. The temperature indicator
light will start flashing.
4.
When the temperature indication light stays on, the appliance has reached
the right temperature.
5.
To iron with steam, press the steam button on the inside of the iron's
handle. A continuous flow of steam will come out of the sole. When you release the button, you will
iron dry, without steam.
6.
Use a steam boost to get rid of stubborn wrinkles. To do so, press the steam button at the top of the
iron's handle.
Please note:
·
Do not touch the hot sole of the iron!
·
Never aim steam at people!
7.
After ironing, place the iron on the thermal insulation pads. Press the power button and the
appliance will turn off. The temperature indicator light will now go out. Pull the plug out of the
socket. Allow the appliance to cool down completely.
If you do not use the appliance for 10 minutes, the temperature indicator light will flash. If you press a
button within those 10 minutes, the iron will stay at the right temperature. Otherwise, the appliance
will switch to sleep mode. If you still haven't made any adjustments after 10 minutes in sleep mode, the
appliance will automatically turn itself off. This is a safety feature in case you forget to turn off the iron.
You can switch the appliance back on using the on/off button.
24
DO7111S
