Idiomas disponibles
Idiomas disponibles
Use
Manual ignition of the hob
If the electronic ignition does not work, the manual ignition is used as a substitute.
CAUTION!
Ignition must be done without any cookware or other object on the
burners.
To generate the flame, fully press down the control knob (Fig. 5 6, page 10)
h
and turn it to the large flame position (Fig. 5 2, page 10).
Simultaneously ignite the burner with a match or gas lighter.
h
Once the flame has been generated, press the knob down for a few seconds so
h
that the flame remains lit.
CAUTION!
If the burner does not turn on:
● check that there is gas in the cylinder.
If the device does not work, close the gas inlet tap and contact your
dealer.
Regulating the hob flame
To adjust the flame, turn the knob to the desired position (Fig. 5 6, page
h
10).
40
EN
