Idiomas disponibles
Idiomas disponibles
3.3
Pure Air Go
How to fold your e-scooter back
together.
WARNING!
Battery and charger
The motor of your e-scooter is powered using a lithium-ion
battery.
Fully charge the battery using the charger provided before
using it for the first time. Always charge the battery in a dry
and clean environment, and turn off the e-scooter during
charging. Only use the provided battery charger with your Pure
Air Go, and if you notice any damage on the charger or cables,
do not use it and contact Pure Electric. Only charge the Pure Air
Go in temperatures between 0°C and 40°C.
Plug one end of the charger into a wall socket and the other
into your Pure Air Go. You will see a red light on the charger
which indicates that the battery is charging, but is not yet fully
charged. During the battery's first charge cycle, this can take up
to three and a half hours
Unfold the kickstand (14) and stand
1
beside the e-scooter.
Unscrew the handle in a counter
2
clockwise direction until the U clamp
is free of the holes. Do not fully remove
it.
Slowly fold down the stem (7). Adjust the
3
clamp (8) and fix it to the hook (12) on
the rear fender.
.
18
