14
F
unction of each Button
WATER TEMPERATURE
BUTTON (Only 2 valve)
• Use to select Water
Temperature.
Pressing the button allows
you to select COLD
WARM (HOT&COLD)
HOT
COLD
respectively.
Default setting is COLD.
AIR DRY
• This button is used for air-drying of your
laundry.
• Air dry selections light up in sequence as
follows.
TUB DRY
60
TUB DRY as the button is pushed.
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
WATER BUTTON
• Use to select the proper amount of water in relation
to the weight and type of laundry.
• Automatically controlled, but can be selected
manually by pressing the WATER Botton.
• WATER is automatically selected for
FUZZY(normal) program.
The following settings are indicated as the button is
pushed
7
8 • 9
10
CHILD LOCK FUNCTION
• Use to lock or unlock the control
90
120
(refer to page 25)
1
2 • 3
4
5 • 6
7
TUB DRY
buttons to prevent settings from
being changed by a child.
To lock, push the RINSE and
SPIN buttons simultaneously and
to unlock push them one more
time during the washing process.
TIME LEFT, DELAY START
(RESERVATION), ALARM INDICATION
• Time left - During operation, the remaining time
is indicated.
• DELAY START INDICATION
(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication -When an error occurs, an error
message appears to indicate the abnormality.
For example,
indicates that the lid is open.
WASH. RINSE. SPIN BUTTON
• Use when wash, rinse, spin
time need to be adjusted.
• The time increases when the
button is pressed .
• If adjustments are needed
during the wash, press the
[start/pause] button before
making any changes.
• When the button is pressed
during washing, the remaining
time is displayed.
