Idiomas disponibles
Idiomas disponibles
3 PREPARING THE PRODUCT FOR FIRST USE
3.1 UNWRAP THE FILTERS
The O2+ Balance comes with the filters installed, however it is necessary to remove the plastic
wrap on each filter prior to using the appliance. Follow the instructions below to prepare your
O2+ Balance filters for use.
1. Grasp the side recesses and gently pull
the top part of the Front Panel towards
you. Then lift the hooks at the bottom
of the panel.
3. Remove filters from
plastic wrap material.
2. Remove all the filters from
the appliance.
4. Put the TrueHEPA and Activated
Carbon filters back into the appliance
in the appropriate order (see Page 3).
NOTE: Make sure that the white tab
on each filter faces you.
6
