Idiomas disponibles
Idiomas disponibles
ISO DIN radio provision
1. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
2. Slide the radio into radio brackets
and secure with screws supplied
with the radio. (Figure B )
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
4. Mount the new radio assembly
into the dash.
5. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly. (It is
best to connect the factory vent
assembly to the radio housing
trim panel prior to installation.)
Kit Assembly
(Figure A)
99-8243B
(Figure B)
3
