Idiomas disponibles
Idiomas disponibles
Tabla de contenido
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (4) #8 x 3/8" Phillips screws
A
The World's best kits.
®
Toyota Prius
Toyota Prius Prime
Visit
specific applications
KIT FEATURES
• ISO DDIN radio provision
• Painted gloss black
B
MetraOnline.com
2016-up
/
(Plus trim)
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
C
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
95-8264HG
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
2017-up
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1761
Antenna Adapter: 40-LX10
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm Socket wrench
Attention!
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
Let the vehicle sit with the key
REV. 11/9/18 INST95-8264HG
Tabla de contenido
Manuales relacionados para Metra Electronics 95-8264HG
Resumen de contenidos para Metra Electronics 95-8264HG
- Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/9/18 INST95-8264HG...
-
Página 2: Dash Disassembly
DASH DISASSEMBLY 1. Unclip and remove the trim panel from around the factory radio. (Figure A) 2. Remove (4) 10mm bolts securing the radio, then unplug and remove the radio. (Figure B) Continue to Kit Assembly (Figure A) (Figure B) 1.800.221.0932 MetraOnline.com... -
Página 3: Kit Assembly
KIT ASSEMBLY 1. Attach the radio brackets to the radio trim panel using the (4) #8 x 3/8” screws supplied. (Figure A) 2. Slide the radio into the assembly and secure with the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. - Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians The World’s best kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/9/18 INST95-8264HG...
- Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/9/18 INST95-8264HG...
-
Página 6: Desmontaje Del Tablero
DESMONTAJE DEL TABLERO 1. Desenganche y quite el panel de la moldura de alrededor del radio de fábrica. (Figura A) 2. Quite (4) pernos de 10mm que fijan el radio; posteriormente, desconecte y retire el radio. (Figura B) Continúe con el Ensamble del Kit (Figura A) (Figura B) 1.800.221.0932... -
Página 7: Ensamble Del Kit
ENSAMBLE DEL KIT 1. Fije los soportes del radio al panel de moldura de radio utilizando los (4) tornillos #8 x 3/8” incluidos. (Figura A) 2. Deslice el radio dentro del ensamble y fíjelo con los tornillos incluidos con el radio. (Figura B) 3. - Página 8 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). The World’s best kits. MetraOnline.com ® © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/9/18 INST95-8264HG...