Idiomas disponibles
Idiomas disponibles
INSTALLATION
Dismantling for installation
• The dryer is supplied with a pressure-mounted cover, and is not
screwed down.
• The 4 attachment screws are provided in the plastic bag with the plugs
and lag bolts.
• Remove the cover vertically from the machine supporting base, taking
care to avoid:
- Damaging the internal components.
- Damaging the cover. We recommend resting it on a flat
surface with the visible part upwards, or on top of a cloth.
Mounting
• Mount the machine along the rear channels.
• Insert the electric ducting through the hole next to the terminal strip.
• Use the drill template provided to fix the dryer to the wall.
• Drill 4 holes with a diameter of 8 mm(5/16"), and take care to clean all
traces of dust from the holes.
• Screw down the base firmly to the wall using a flat ended screwdriver
of 6 -7mm (1/4").
• Connect the electric ducting to the terminal strip. Screw down the 3
locking screws firmly.
-11-
www.mediclinics.com
