Checking For Leaks - Glacier bay HD873X-1910H Guía De Instalación Y Cuidado

Installation (continued)
11
Installing the escutcheon
and handle assembly
□
Place the installation plate (E) and escutcheon (F)
onto the valve body (D). Attach the handle
assembly (G) by threading the base of the handle
assembly (G) onto the valve body (D) and twisting
clockwise until secure. Do not overtighten the
handle assembly (G) as this could damage
the escutcheon (F).
12

Checking for leaks

□
Turn the handle (G) to the full on mixed position.
□
When the valve body (D) is turned on, water
normally ows through the tub spout (K). To
activate the shower, turn the valve on and pull
the knob (1) up. Hold the knob (1) until the water
ows continuously from the shower arm (B).
Check for leaks.
□
Shut off the water at the faucet and supply lines.
NOTE: When the pattern of the water ow switches to
the shower from the tub spout, some low leakage from the
tub spout is a normal occurrence.
UP
FOR
SHOWER
1
K
E
F
G
Down
K
13
Please contact 1-855-HD-GLACIER for further assistance.
B
G
HOMEDEPOT.COM/GLACIERBAY
D
D