Idiomas disponibles
Idiomas disponibles
44 SMART FUNCTIONS
Using Inicio Remoto(Remote Start)
Use a smart phone to control the appliance remotely
or check to see how much time is left in the cycle.
1
Press the Encendido/Apagado (Power) button.
2
Load the laundry.
Press and hold Inicio Remoto(Remote Start)
3
button for 3 seconds to enable the Inicio
Remoto(Remote Start) function.
4
Start a cycle from the LG ThinQ application on
your smart phone.
NOTE
• Once the Inicio Remoto(Remote Start) mode is
enabled, you can start a cycle from the LG ThinQ
smartphone application. If the cycle is not started,
the machine will wait to start the cycle until it is
turned off remotely from the application or the
Remote Start mode is disabled.
• If the door is open,Inicio Remoto(Remote Start) is
disable.
Disabling Inicio Remoto(Remote Start)
When the Inicio Remoto(Remote Start) is activated,
press and hold the Inicio Remoto(Remote Start)
button for 3 seconds.
The operation is subject to the following two
conditions:
(1) this device may not cause harmful interference
and
(2) this device must accept any interference received,
including interference that may cause undesired
operation of the device.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to [email protected]. This offer is valid for three
(3) years from the date on which you purchased the
product.
