Idiomas disponibles
Idiomas disponibles
B
Using the appliance
6. Change the freezing doar:
1) Remove the shaft sleeve and cap of the upper end cover of the freezing doar and install
them at the lefl and right swap positions.
2) Remove the doar self-locking, doar stop and shaft sleeve of the freezing doar, take out the
lefl doar self-locking from the accessory bag, install it on the lefl side of the lower end cover
of the freezing doar, change the doar stop and shaft sleeve to the lefl side of the lower end
cover of the freezing doar.
7. lnstall the replaced freezing dooron the lower hinge, then install the middle hinge and
cover the hinge hole decorative cover.
decorative
cover
middle hinge
12
EN
B
Using the appliance
8. Remove the upper left hinge cover and upper left hinge from the accessory bag.
Place the refrigerated door body on the middle hinge and install the upper left hinge.
Connect the refrigerator top signal line
2
3
signal line
to the signal line
. Finally, replace the hinge decorative cover to the right
side of the box body.
NOTE:
When replacing the hinge decorative cover to the right side
of the box body, the two inserts on the hinge decorative
cover (as shown in the figure) shall be cut off.
4
upper hinge
The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor.
13
4
1
to the door body signal line
, and connect the
upper hinge cover
decorative cover
inserts
3
2
1
EN
