Idiomas disponibles
Idiomas disponibles
Step 1
H2 x 4
C
NOTE: DO NOT fully tighten all the bolts and nuts until the bench has been adjusted and all the
legs are levelled so that they do not wobble. Once adjusted then go back and tighten while
making sure that the unit remains level.
a)
Unpack the units and confirm that you have all hardware and required parts.
b)
Lay the Seat Frame with Cushion (A) upside down on a carpeted or scratch-free work surface.
c)
Remove the plastic caps from the hanger bolts of the Legs (C)
d)
Attach two Legs (C) to the corner blocks on the long end of the Seat Frame (A) by inserting
the hanger bolts on the Legs (C) through the pre-drilled holes on the corner blocks. Fit the Flat
Washer (H4), Lock Washer (H3) and Hex Nut (H2) onto each hanger bolt.
hex nuts in this step.
H3 x 4
C
H4
H3
H2
Need Assistance? Visit us at: samsclub.com
H4 x 4
C
H7
A
A
C
DO NOT
tighten the
6 |
P a g e
