Idiomas disponibles
Idiomas disponibles
WARNING
If the battery pack cracks or breaks, with or without leaks,
do not recharge it and do not use. Discard it and replace
with a new battery pack. DO NOT TRY TO REPAIR IT! To
prevent injury and risk of fire, explosion, or electric shock,
and to avoid damage to the environment:
•
Cover the terminals of the battery with heavy-duty
adhesive tape.
•
DO NOT try to remove or destroy any of the battery
pack components.
•
DO NOT try to open the battery pack.
•
If a leak develops, the released electrolytes are
corrosive and toxic. DO NOT get the solution in the
eyes or on skin, and do not swallow it.
•
DO NOT put these batteries in your regular household
trash.
•
DO NOT incinerate.
•
DO NOT put them where they will become part of any
waste landfill or municipal solid waste stream.
•
Take them to a certified recycling or disposal center.
7
PROPOSITION 65
WARNING
This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals
are:
•
Lead from lead-based paints;
•
Crystalline silica from bricks and cement and other
masonry products;
•
Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending
on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
Save these instructions.
8
INSTALLATION
8.1
UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
English
•
If parts of the machine are damaged, do not use the
machine.
•
If you do not have all the parts, do not operate the
machine.
•
If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
8.2
ADJUST THE CAULK GUN
1. Press the lock out button (4) to the left, to release the
plunger rod (2).
2. hold the plunger rod handle (3) and move the plunger rod
back and forth.
8.3
INSTALL THE CAULK TUBE
10
8
Make sure that the removable cartridge holder (8) is
correctly attached, and there are no residues in the
removable cartridge holder before installing.
1. Cut off the spout of the caulk tube (10) at a 45˚ angle.
2. Press the lock out button (4) to the left, pull back the
plunger rod handle (3) until the plunger rod (2) reaches
the rear of the removable cartridge holder.
3. Place the caulk tube into the removable cartridge holder.
4. Press the lock out button (4) to the left, push plunger rod
(2) forward to make sure that both ends of the caulk tube
are firm.
8.4
REMOVE THE CAULK TUBE
1. Press the lock out button to the left.
2. Hold the plunger rod handle and pull the plunger rod
backwards.
3. Take out the caulk tube.
7
WARNING
4
NOTE
EN
3
2
