Denver DAB-23 Manual De Instrucciones página 4

Idiomas disponibles

SWITCHING YOUR RADIO ON FOR THE FIRST TIME

When the radio is connected to the power for the first time, the display backlight will be on for

8 seconds, the greetings and then the clock will be displayed. Press the STANDBY bytton

once will turn the radio on, the DAB will be automatically selected and perform auto tune

full scan function. (F.1) (F.2) (F.3)

LISTENING TO YOUR RADIO

DAB MODE

If the radio is connected to the power and then switched on from standby for the first time, the radio

will automatically enter into the DAB auto tune full scan mode. During this mode, the display will

show a slide bar to indicate the progress of the scan.

Unlike normal radio, the separate signals from a number of stations are grouped together and

transmitted in a single frequency; these groups are referred to as multiplexes and ensembles.

Every time one of these groups has been found, the name of that group will be displayed on the

bottom half of the display.

Autotune modes

There are two types of auto tune modes, one is quick scan and the other is full scan. Quick scan will only

search for the UK DAB Band III channels and full scan will search all DAB Band III channels. Once the scan

has finished, the radio will select the first alphanumerically found station.

1. To activate the quick scan, press the AUTOTUNE button once, the display will show "Autotune Quick

scan" and then a progressing slide bar and "Searching...".(F4)

2. To activate full scan, press and hold the AUTOTUNE button until the display shows "Autotune Full scan".

(F5)

3. To explore the stations that have been found, press the UP or DOWN button.

UK - 3