Qlima FWK 1628 Instrucciones De Uso página 64

CHANGING THE REVERSIBLE DOOR (Noted: FWK 1628A is NOT reversible)
CAUTION:
•
Door Removal
•
•
•
•
•
•
•
Door Installation
•
•
•
•
•
•
4
64
FWK1628 is designed with a reversible door feature (door to open/close
either from the left or the right side). To reverse the opening direction of
your door, please follow these simple instructions.
To avoid personal injury to yourself and/or damage to property and / or the
wine cooler, it is highly recommended that someone assist you during the
door reversal process.
Turn off the unit and disconnect the power plug from the wall outlet.
Tilt the unit backwards and secure at an angle of 45 degrees.
Remove the upper hinge cover (Fig.4: No.6).
Remove the screws (Fig.4: No.1) that secure the upper hinge (Fig.4: No.5) to
the frame. Remove the upper hinge (Fig.4: No. 5).
Lift the door, remove from lower hinge and place it on a padded surface to
prevent damage and scratches.
Remove the screws (Fig.4: No.3) that hold the lower hinge, front leg (Fig.4:
No.2). Remove the lower hinge, front leg (Fig.4: No.2).
Remove the front leg (Fig.4: No. 4) and transfer to opposite side.
Remove the cover plate (Fig.5: No.7) covering the upper hinge holes.
Reverse the direction of lower hinge (Fig.5: No. 2).
Install the lower hinge, front leg (Fig.5: No. 2) on the lower frame with screws
(Fig.5: No. 3).
Secure door onto lower hinge.
Holding the door in the closed position, secure the upper hinge (Fig.5: No. 5)
to the door and screw into the frame (Fig.5: No. 1).
Note: Do not fully tighten the screws (Fig.5: No. 1) until the top of the door is
level with the top of the unit.
Install upper hinge cover (Fig.5: No. 6) over the upper hinge.
Fig.4 Fig.5