Idiomas disponibles
Idiomas disponibles
6.
Operation
1.
Install and connect the device as described above.
2.
Fill the tank with adequate smoke liquid (not incl.). Never overfill the tank or run
the device with an empty tank.
3.
Switch on the device. The device is ready-for-use as soon as the knob on the
remote controller lights.
4.
Briefly press the knob on the remote controller to produce smoke.
5.
Switch off and disconnect from the mains after use.
7.
Cleaning and Maintenance
Before starting any cleaning or maintenance activities:
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
Cleaning
Use normal glass cleaner and a soft cloth to wipe off the outside casing.
Always be sure to dry all parts completely before plugging the device back in.
Cleaning frequency depends on the environment in which the unit operates (i.e.
smoke, fog residue, dust, dew).
Do not immerse the device in any liquid.
Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g.
ceiling, suspension, trussing) should not be deformed, modified or tampered with;
e.g. do not drill extra holes in mounting supports, do not change the location of the
connections...
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified
technician maintain the device.
There are no user-serviceable parts, apart from the fuse and the lamp.
Refer to an authorized dealer for service and/or spare parts.
Fuse Replacement
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
3.
Open the fuse holder.
4.
Replace with an identical fuse.
5.
Insert the fuse holder back in its place, replace the rear cover and reconnect
power.
V. 02 – 08/11/2018
HQSM10011
6
©Velleman nv
