Idiomas disponibles
Idiomas disponibles
4.1.2.2- Chorine menu
With this menu you can select all parameters related to chlorine production.
4.1.2.2.1- Chlorine production
Configuration of the maximum production of chlorine.
From 0% to 100% Press "OK" and use the arrows to change the value.
Press "OK" to confirm the adjustment.
Note: Chlorine production may be limited regardless of the operation mode
(manual, automatic...) that is selected.
4.1.6.2- Adjustment of the set value (Max. PPM)
En el cual se instala una sonda de cloro libre (OPCIONAL)
In this case, adjust the value in ppm as required. A value between 1ppm and
1.5ppm is correct.
NOTE: if working in automatic, you can also adjust the production percentage
from 0% to 100%,
4.1.2.2.3- Super chlorination
Select this option if you require super-chlorination of your swimming pool,
bearing in mind the following:
Without a Temperature probe, super-chlorination will be carried out for 24
hours. If filtration is stopped, super-chlorination is suspended.
4.1.2.3- pH menu
You can access the pH menu from the main menu by pressing OK
41 / 46
Manual PRO250V2 v.1
