Safety; Explanation Of Symbols; Intended Use - WIKA CPP700-H Manual De Instrucciones

2. Design and function / 3. Safety
Handling of mineral oils
WIKA delivers hydraulic fluid based on mineral oil in containers of 1 litre, labelled "Shell
Tellus S2 M22", for use in hand test pumps with up to 1,000 bar (14,500 psi). It is no more
hazardous than other common lubricating oils.
Before working with hydraulic fluids, read the material safety data sheet.
The current material safety data sheet can be found at www.wika.de on the
product page of the respective product.

3. Safety

3.1 Explanation of symbols

WARNING!
... indicates a potentially dangerous situation that can result in serious injury
or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries
or damage to property or the environment, if not avoided.
Information
... points out useful tips, recommendations and information for efficient and
trouble-free operation.

3.2 Intended use

Test pumps serve as pressure generators for the testing, adjustment and calibration
of mechanical and electronic pressure measuring instruments through comparative
measurements.
These pressure tests can take place in the laboratory or workshop, or on site at the
measuring point. The model CPP700-H and CPP1000-H hand test pumps have been
specifically developed for test pressure generation on site.
The hand test pumps, despite their very compact dimensions, enable simple
and accurate test pressure generation of up to a max. of 700 bar (10,000 psi) or
1,000 bar (14,500 psi) respectively, with an integrated switching from initial pressure to
high-pressure generation.
WIKA operating instructions, models CPP700-H and CPP1000-H
EN
7