Idiomas disponibles
Idiomas disponibles
System Exclusive Table:
Packet
Parameter
number
payload
0E
D0 D1 D2
0F
D0
12
D0
14
D0 D1
D0 D1 D2
17
D3 D4 D5
D6
19
D0 D1
1A
D0
1B
D0
1C
D0
28
D0 D1 D2
Set MIDI channel (software channel).
D0 = Reserved, set it to '0'
D1 = TX channel value 0-15 for channel 1-16
D2 = RX channel value 0-15 for channel 1-16. 16 means all channels
Set MIDI in transpose.
D0 = transpose value 0 - 24 for transpose -12 to + 12 (value 12 is no
transpose)
Set key priority.
D0 = Key priority, 0—Low, 1—Hight, 2--Last
Set multi trigger.
D0 = Multi trigger, 0-off (slide), 1-on, 2-off (legato)
D1 = Reserved, set it to '0'
Set midi forwarding.
D0 = Keyboard midi forwarding:0 - OFF, 1 –DIN, 2 – USB, 3 -BOTH
D1 = Sequencer midi forwarding:0 - OFF, 1 –DIN, 2 – USB, 3 -BOTH
D2 = Arpeggiator midi forwarding:0 - OFF, 1 –DIN, 2 – USB, 3 -BOTH
D3 = Realtime midi forwarding:0 - OFF, 1 –DIN, 2 – USB, 3 -BOTH
D4 = Reserved, set it to '0'
D5 = Reserved, set it to '0'
D6 = Reserved, set it to '0'
Set sync clock polarity.
D0 = Sync polarity, 0 – fall, 1 – rise
D1 = Reserved, set it to '0'
Set sync clock rate
D0 = clock rate, 0 – 1 PPS, 1 – 2 PPQ, 2 – 24 PPQ, 3- 48 PPQ,
Set sync clock source.
D0 = clock source, 0 – Internal, 1 – MIDI, 2 – USB, 3 – TRIG,
4 – Automatic
Set accent velocity threshold.
D0 = Accent velocity threshold, value 0–127
Set midi soft through configuration.
D0 = DIN to USB, 0 – Disable, 1 – Enable
D1 = DIN to DIN, 0 – Disable, 1 – Enable
D2 = USB to DIN, 0 – Disable, 1 – Enable
16
Function
