Idiomas disponibles
Idiomas disponibles
Fast and exact positioning of the magnet is a prerequisite for good welds.
The magnet must not be rotated during or after positioning if there is contact
with the waterproof membrane. If this instruction is not followed, the water
proof membrane may be damaged.
Clean magnets from debris on a regular basis to prevent membrane damage.
•
Ensure that all fastening points have been properly welded.
•
Should you be uncertain about whether some welds have completed properly,
SFS recommends testing with a commercially available suction pad.
See isoweld
®
information.
18
3000 / isoweld
3000m Operating Instructions for more
®
