Idiomas disponibles
Idiomas disponibles
Instruction Manual for HA-INDUC-30
General safety regulations
The product you have purchased corresponds to the latest state of technology and the accepted safety regulations, still
there are potential risks. Only operate the induction hotplate in an immaculate condition and observe these operating
instructions!
Only use the device for its intended purpose.
Attention:
In order to prevent possible injuries or electric shock, please observe the following:
•
Never touch the device and the power plug with wet hands.
•
Do not connect the device to the same outlet with other devices. Connect the device to a suitable outlet.
•
Never move the device by pulling on the power cable.
•
Do not move the induction hotplate during cooking or with hot cookware on top of it.
•
Do not place any empty containers on the device.
•
Do not place any metal objects on the device.
•
Check the mains connection cable for damage from time to time. Never operate the device w hen the cable is
damaged. If the mains connection cable shows defects, let a qualified electrician exchange it.
•
Never use the device when it does not function properly, shows damage or in case it was dropped.
•
Do not leave the device unsupervised during operation. Keep children and other incompe- t ent persons away from the
device.
•
Do not submerge the device in water or other liquids and do not wash it in the dishwasher.
•
Do not operate the device on any metal table.
•
Only qualified experts may perform repair and maintenance work on the device using original replacement and
accessory parts. Never attempt to repair the device yourself!
•
Do never heat sealed food such as canned goods before opening their covers.
•
The appliance is not intended to be operated by means of an external timer or separate remote control system.
•
The workplace related noise emission of this appliance is lower than 70 dB(A).
TECHNICAL DATA:
Voltage: 220-240V50Hz
Power output: 3400Watt (left side: 1400W, right side: 2000W)
Installing the device
•
Place the device on a stable and level surface.
•
Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).
•
Do not block the ventilation slots of the device. This may overheat the device. Keep a Min. distance of 5 to 10 cm to
walls or other items.
•
Do not place the induction hotplate next to devices or objects, which react sensitively to magnetic fields (e.g. radios,
TVs, cassette recorders, etc.).
•
Do not place induction hotplates next to open fires, heaters or other sources of heat.
•
Make sure that the mains connection cable is not damaged or squashed beneath the device.
•
Make sure that the mains connection cable does not come into contact with sharp edges and/or hot surfaces.
Commissioning the device
•
Prior to connecting the device, check whether the voltage indicated on the type plate corresponds to the voltage
supply in your home. A wrong connection may lead to grave damage on the device and injury to persons.
•
The hotplate's surface consists of temperature-resistant ceramics. In case of damage, even if this concern only a
small tear, disconnect the device from the power supply immediately and contact the customer service.
•
We recommend not placing any metal kitchen utensils, cookware or pan lids, knives or other metal objects on the
hotplate. These may heat up when the device is turned on.
•
Do not place any magnetically objects like credit cards, cassettes etc. on the glass surface while the device is in
operation.
•
On order to avoid overheating, do not place any aluminium foil or metal plates on the device.
•
Do not insert any objects like wires or tools into the ventilation slots. Attention: this may cause electric shocks.
ENGLISH
2
