Haier HC17SF10RB Manual Del Usuario página 9

Ocultar thumbs Ver también para HC17SF10RB:
Idiomas disponibles

Idiomas disponibles

INSTALLATION INSTRUCTIONS
INSTALLATION LIMITATIONS
• Do not install your refrigerator in any location not properly insulated or
heated, e.g. garage, etc. Your refrigerator was not designed to operate in
• Select a suitable location for the refrigerator on a hard even surface away
from direct sunlight or heat source, e.g. radiators, baseboard heaters,
cooking appliances, etc. Any floor unevenness should be corrected with
the leveling legs located on the front bottom corners of the refrigerator.
NOTE: As the door gets pressed in during shipping, after reversing the
door, the gasket may have to be reset. This is done to prevent the cool
refrigerated air from escaping. If there is a gap between the door gasket
and the cabinet, set the gasket by gently pulling it out to seal the gap.
REFRIGERATOR USE
GENERAL FEATURES
NOTE: If the refrigerator has been placed in a horizontal or tilted position
for any period of time wait 30 minutes before plugging the unit in.
Adjustable temperature dial:
Your refrigerator will automatically maintain the temperature level you
select. The temperature control dial has 7 settings plus "OFF". 1 is the
warmest. 7 is the coldest. At first, set the dial to 3 and allow 24 hours to
pass before adjusting the temperature to your needs.
Freezer Compartment / Ice Cube Trays
WARNING
This compartment is not cold enough to freeze foods
safely for more than 5 days.
This compartment is designed for making ice cubes and for short-term
food storage (a few days at most).
If ice cube tray freezes to the bottom of the compartment, pour a little
warm water around it to loosen it. Do not use boiling water, which can
damage plastic parts, or sharp metal objects such as a knife or screwdriver,
which can damage the cooling system tubing. Wash the ice cube tray in
lukewarm water only. Do not wash in the dishwasher.
49-60774
9
loading