Idiomas disponibles
Idiomas disponibles
INSTALLING BATTERIES
1. Press down on latch and lift the battery cover to open the
battery compartment.
2. Install or replace 4 "AA " sized batteries in the battery
compartment according to the indications inside the
compartment.
3. Close the battery cover by pushing in the top end of the
battery door.
A A
A A
A A
A A
Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is switched on.
Replace all batteries at one time (as simultaneous set). Use only
1.5V "AA " alkaline batteries. Remove batteries when unit is not
in use for extended periods of time. Date and time will need to
be reset if batteries are removed or replaced. Clean contacts on
battery and in battery compartment with a soft dry cloth each time
you install batteries.
Note:
Batteries are hazardous waste. Do not dispose of them together
with the household garbage.
Battery
Cover
12
DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the SET button
2. The display will show a blinking number showing
the MONTH. Change the MONTH by pressing the
button. Each press will increase the number by one in
a cycling manner. Press the SET button
confirm the entry, and the screen will show a blinking
number representing the DAY of the month.
3. Change the DAY, HOUR, and MINUTE as described
in Step 2 above, using the
numbers and the SET button
repeat process to set DAY, HOUR, and MINUTE
.
again to
button to change the
to confirm the entries.
Press the
button
blinking MONTH
increasing MONTH
confirm the entry
13
