Num'axes NGPIEACC021 Manual De Instrucciones página 12

Panel solar con batería interna
Idiomas disponibles
  • ES

Idiomas disponibles

Electrical
Solar panel
specifications
Solar energy conversion efficiency > 18%
AC/DC power adaptor
Charging time
Output plug
Dimensions of solar panel
Weight of solar panel
Mounting
Operation temperature
Operation humidity
Tightness
Mounting
Adjust the angle of the bracket so that the solar panel is directly facing the sun. Generally in the northern
hemisphere, this means the panel is facing south. For a maximized performance, ensure the solar panel is
facing south, in an un-shaded position and ideally tilted at a 45 degree angle. This will prevent the need to
change its orientation every season and ensure its continued efficiency. However, please note that the ideal
orientation depends on the specific situation of the set-up site.
Do not install the solar panel in a location where the sunlight may be blocked from getting to the panel.
NOTE: The side that connects with the power cable must face down, so as to prevent water damage in
case of rain.
Connecting
Plug one end of the output cable into the output socket of the panel (at the right side of solar panel), and
then plug the other end into the external power port of your NUM AXES trail camera. If the internal battery
of the solar panel is charged, the camera will be immediately powered.
WARNING
Use of the solar panel with a NUM AXES trail camera (model PIE1009, PIE1010, PIE1023, PIE1025 or
PIE1027): It is strongly recommended that the batteries be installed inside the camera even when
connected with the solar panel. Otherwise, the camera may stop operating due to power shortage.
During intensive use of the camera, the internal battery may not be charged fast enough, and
therefore, the solar panel is not ideal to be used alone without the batteries.
The solar panel is NEVER to be used in parallel connection with any other power sources, any
damages resulting from this incorrect usage will not be covered by the warranty.
Panneau solaire avec batterie intégrée – Grand modèle – NGPIEACC021 – indice A – avril 2018
3.3W (9.5V / 270mAh)
Input: 100-240V
50/60Hz
Output: DC 10V
1.5A
From 7 to 11h using solar light
From 2 to 3h30 using AC adaptor
5.5 mm x 2.1 mm
L 195 mm x W 125 mm x H 19 mm
L 7.7 in. x W 4.9 in. x H 0.7 in.
290 g / 10.2 OZ.
Strap, bracket
-30°C +70°C / -22°F +158°F
5% 95%
IP66
12/40
loading