Machine Operating Cycle; Switching Off - Luxia OCEANO 35 Manual De Uso Y Mantenimiento

A machine operating cycle is made up of:
1) Washing phase (lasting 105 seconds) with jets
of hot water (55°-60° C) under pressure, mixed
with detergent.
2) Rinsing phase (lasting 15 seconds) with jets of
hot, clean water (75°-90° C), mixed with
rinse aid.
DANGER: The machine working cycle is stopped in case of accidental door
opening, thanks to a safety microswitch (a).
When the door has been closed, the cycle restarts right from the point where it had
been stopped.
To switch the machine off just take the main
switch (1) to OFF and empty the machine by
acting taking away the overflow pipe (a).
ADJUSTING RINSE AID MEASURE (b)
(to be done with machine switched off)
To adjust the rinse aid measure (b), act with a
screwdriver CLOCKWISE to decrease the
amount, ANTICLOCKWISE to increase it
(Please contact specialised personnel).
ADJUSTING DETERGENT MEASURE (c)
(to be done with machine switched off)
To adjust the detergent measure (OPTIONAL) (c),
act with a screwdriver CLOCKWISE to decrease
the amount, ANTICLOCKWISE to increase it
(Please contact specialised personnel).
Operating and service manual

22 - MACHINE OPERATING CYCLE

23 - SWITCHING OFF

1
b
c
OCEANO 35/40/50/60
English
a
a
pag. 39 di 116