Idiomas disponibles
Idiomas disponibles
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Warning: If the kettle is overfilled, boiling water may be ejected.
Special Safety Instructions for the Kettle
Use only cold water when filling the device.
The water level must be between the MAX. and MIN. marks.
Switch the kettle off before removing it from the base.
Always ensure that the lid is tightly closed.
The base and exterior of the kettle must not become wet.
Kettle body used must match with the kettle base.
First Use of the Kettle
Before using the kettle for the first time, fill the kettle with cold water and boiled it
twice without any additives.
1. Fill the kettle with water. Do not overfill. Use the water level indicator.
2. Place the kettle on the base.
3. Electrical connection
Check whether the electrical voltage which you intend to use is the same as
that of the kettle. Details can be found on the label on the base of the kettle.
Only connect the kettle to a properly installed 220-240V~ 50/60Hz socket.
4. Switch the kettle to position '1'. The control lamp on the water indicator shows
that the water is being boiled.
5. After boiling, the kettle switches off automatically.
Disconnect the kettle from the mains electricity supply.
Do not open the lid when pouring.
If the kettle is overfilled ,boiling water may be ejected.
The kettle is only to be used with the stand provided.
6. This appliance is intended to be used in household and similar applications such
as:
-
staff kitchen areas in shops, offices and other working environments;
-
farm houses;
-
by clients in hotels, motels and other residential type environments;
-
bed and breakfast type environments.
CAUTION:
Do not dispose of this product as it has with other household products. There is a
separation of this waste product into communities, you will need to inform your
local authorities about the places where you can return this product. In fact,
electrical and electronic products contain hazardous substances that have
harmful effects on the environment or human health and should be recycled. The
symbol here indicates that electrical and electronic equipment should be chosen
carefully, a wheeled waste container is marked with a cross.
Manufactured and imported: Adeva SAS 8 rue Marc Seguin 77290 Mitry-Mory FRANCE
www.hkoenig.com - [email protected] - Tel 01 64 67 00 01
ENVIRONMENT
