Pool Preparation; Cleaner Components - Pentair KREEPY KRAULY BLUEREBEL Guia De Instalacion

Pool Preparation

Before installing the BLUEREBEL™ Suction Side Pool Cleaner, your pool should be clean and algae-free so as to not inhibit
the cleaner's traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.

Cleaner Components

Remove the cleaner and all parts from the box. Check to be sure all components are included.
1. BLUEREBEL cleaner body
2. Hose float
3. Valve cap
4. Regulator valve
5. Conical Adaptor
6. Flow gauge
7. Hose Set – 11 Sections
---10 Standard Male/Female
Hoses of 1m
---1 Leader Hose (36cm)
Figure 1
1.
3.
2.
4.
6.
5.
4
POOL PREPARATION
7.
Standard Hose Leader Hose