ENGLISH
Radio Battery Meter
Battery full bars indicates battery high
bar, device is on low battery mode and will indicate low battery alert in
the forms of alert tone and blinking bar display.
Note:
- Remove the battery from radio for storage purposes.
- Be careful when removing the batteries. Do not use sharp or
conductive tools to remove either of these batteries.
- Remove the batteries before storing your radio for extended periods
of time. Batteries corrode over time and may cause permanent
damage to your radio.
- Do not mix old and new batteries and Do not mix alkaline, standard
(carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.
Battery Capacity Maintenance(Applicable to NiMH
rechargeable batteries only)
1. Charge the NiMH batteries once every 3 months when not in use.
2. Before placing the radio in storage, remove the battery.
3. Store the NiMH batteries in temperature between -20 °C to 35 °C
and in low humidity. Avoid damp conditions and corrosive materials.
Using the Micro-USB Charger(Applicable to NiMH
rechargeable batteries only)
The micro-USB charger is a handy port that allows you to conveniently
charge your NiMH battery. Use certified adaptor(5V~1A). Do not
attempt to charge alkaline batteries.
1. Make sure your radio is turned OFF.
2. Plug the micro-USB cable into the micro-USB charging port on
your radio. Connect the other end of the micro- USB charger to wall
power outlet.
3. The battery meter on LCD will move to indicate the battery is
charging.
.When battery meter shows 1
11
