Axygen AxySpin R Serie Manual De Instrucciones página 7

Idiomas disponibles

Starting and Stopping a Run

3.5.

Please refer Chapter 5 Operation to set up your preferred settings of time, speed and temperature.

To start a run, press down the

When the pre-set time expires, the centrifuge will stop automatically. To stop the centrifuge prior to

the expiration of set time, press the

When the time is set as "continuous"( - - ), the centrifuge will run continuously. To stop the

continuous run, press the

By pressing and holding the

short-run will stop if the

Note:

1. For safety reasons, the

symbol "

" will be flashing until the lid is closed.

Emergency Lid Release

3.6.

When the lid can't be opened by pressing the

off the power of the centrifuge. Second, use a flat-head screw driver or other tool to remove the

Emergency Lid Release Plug ( Please refer Figure 2 ) on the right-hand side of the machine. Third,

pull the wire (attached to the plug) while gently pushing downward on the lid. The lid will now

release.

Figure 1. Loading the rotor

(START/STOP) knob.

(START/STOP) knob again.

(START/STOP) knob.

button, the centrifuge will continue a short-run of set speed. The

button is released.

(START/STOP) knob will be inactivated when the lid is open. A

button, users can open the lid manually. First, turn

Securing

screw