Mafell 202069 Guia página 3

1 Product information
In respect of accessory "universal guide" with item No. 202069
1.1 Manufacturer´s data
MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49
(0)7423/812-218, e-mail: [email protected]
2 Use according to intended purpose / operation
The universal guide 1 (shift rail) can be used with all MAFELL machines that are equipped with a parallel guide
fence as 2 (see illustration).
The angle fence 3 can be set to the desired value with the scale (at the reverse side of the universal guide) and
fastened with the wing screw 4.
The universal guide 1 is placed against the workpiece with the angle fence 3 and the guide rail 5 is held in place
on the workpiece manually. The MAFELL machine is introduced into the guide rail 4 with the parallel guide fence
2 and shifted across the workpiece. The universal guide 1 is secured with rubber strips against slipping and can
in addition be fastened on the workpiece through the holes 5.
-3-
English