Idiomas disponibles
Idiomas disponibles
3.2
Mounting / Unmounting of the socket
How to mount socket on valve
1. Turn over the actuator to see underneath the gearbox side.
2. To get the largest length of spline engaged, check end to
insert first in the gearbox: smooth end or splined end.
3. Bring closer this end of the socket to the gearbox.
4. Position the keyway of the socket to match the
corresponding keyway of the wheel (OPEN or CLOSE
according to default position).
5. Insert the socket into the wheel splines.
6. Put the circlip in place to hold the socket in place.
How to remove socket
1. Remove the circlip with the circlip pliers.
2. Remove the spline socket.
If alignment cannot be obtained, it could result from a wrong positioning.
All AQ 150-1000 are delivered with
removable spline socket. It inserts into
the wheel and allows a precise
positioning between the actuator and
valve shaft.
Indicator position shows if default
position of the actuator is opened
(OPEN) or closed (CLOSE).
11
